Each card that is printed has an RFID chip in it with a 5-6 digit number. Once the card is printed the chip number needs to be assigned to the persons record so that system can recognise the person.
To do so, take the following steps.
1. Plug in the RFID Swiper into your computer’s USB.
2. Go to the ‘Settings’ tab and select ‘Print Cards’.
3. If you have uploaded images prior to printing cards, you might find it useful to use the ‘Has Photo’ along with the ‘No access ID’ filters.
4. Click on
for each person you need to add the Access ID for.
5. Swipe the card over the RFID Swipe Machine, as it will input the card number.
6. Now press the ‘Enter’ button on your keyboard.
7. Repeat for all the users you need to add an Access ID for.
Troubleshoot: Before issuing any cards make sure you run the filter ‘Has Photo’ and ‘No Access Id’. This will bring up any cards where the Access ID may not have been saved.